Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (March 2009, week 5)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Tue, 31 Mar 2009 17:14:18 -0700
Reply-To:     brady <dofunk@YAHOO.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         brady <dofunk@YAHOO.COM>
Subject:      Re: Backup Battery access '81 Vanagon?
Comments: To: "Costello, James L" <jlcostello@KPMG.CA>
In-Reply-To:  <2840355301D23642BE0E800424DC148709521FFB@CAWSTEXC31.ca.kworld.kpmg.com>
Content-Type: text/plain; charset=us-ascii

Remove the seat from the swivel base first. To do this look closely at the base of the seat by the leaver that allows you to move it forward and back on the rails. Just by this lever is a stop that is actually spring loaded. When the seat is as far as it will go forward look and you will see the little stop I'm referring to and if you lift it up over the stop while pulling forward the seat will slide off of the rails all of the way then you can rotate the base all of the way and remove the second batt. There might be some plastic shims in the rails that might fall off when you slide it off of the rails so just watch for those. Putting it back is the same procedure in reverse. I've removed the front seats from the van and use them out of the van as real comfortable chair when camping! Have fun!

----- Original Message ---- From: "Costello, James L" <jlcostello@KPMG.CA> To: vanagon@GERRY.VANAGON.COM Sent: Tuesday, March 31, 2009 6:50:51 PM Subject: Backup Battery access '81 Vanagon?

Hey All,

Sorry, a Vanagon Newbie question:

I am having issues accessing the backup battery in my 1981 Vanagon under the driver's seat. Is there a trick to this? I have tried sliding the Driver's seat all the way forward and back, and turning it on the swivel in every direction I can figure out. The problem lies in the fact that the steering wheel is in the way of a 180 degree rotation, as I found the access works on the passenger side.

Do I need to take the entire chair assembly off in order to access that panel? If there is a trick to turning this chair around, I would really appreciate any feedback!

Cheers,

James P Please consider the environment before printing this e-mail

************************************************************************ The information in this email is confidential and may be legally privileged. It is intended solely for the addressee. Access to this email by anyone else is unauthorized.

If you are not the intended recipient, any disclosure, copying, distribution or any action taken or omitted to be taken in reliance on it, is prohibited and may be unlawful. When addressed to our clients any opinions or advice contained in this email are subject to the terms and conditions expressed in the governing KPMG client engagement contract. ************************************************************************


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.