Bob, Can you put up some photos of the battery installation? Pieces to trim, etc. Where did you buy the batteries, any wiring tips? Guages, lengths, etc. Have seen Karl's web site, but more info always welcome. Thanks Thomas
>Date: Mon, 6 Apr 2009 16:49:59 -0600 >From: Bob Stevens <mtbiker62@GMAIL.COM> >Subject: Re: Dremel, was Re: Best Way To Remove I'm installing the UB12220 Universal 12V 22ah batteries (4) in the aux box under the driver seat. I prep for this I removed the steel flange from inside the box that holds the bolt that secures the battery. I used a carbon cutting disc on my Dremel to cut most way through the flange, then used pliers to leverage it off the rest of the way. Very surprised at how the Dremel cut through this thick steel (1/8"?) as long as I went slowly, not asking the Dremel to be an industrial cutting tool. I'm going to also use this to cut out notches on the aluminum angle metal to connect the battery terminals (as seen on Karl Mullendore's Westyventures.com site). Bob Stevens '87 Syncro Westy |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.