Date:         Sun, 5 Apr 2009 15:11:14 -0400
Reply-To:     Hector Zapata <hlzapata@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Hector Zapata <hlzapata@GMAIL.COM>
Subject:      Re: Automatic transmission leak
In-Reply-To:  <646833.55485.qm@web33903.mail.mud.yahoo.com>
Content-Type: text/plain; charset=ISO-8859-1

That's the governor's cover, and it uses an o-ring for seal. The o-ring ( VW
part # 003 325 381, 90x3 mm) I think comes with the trans rebuild kit, and
it can be easily replaced. Just don't remove the governor. When you do get
to replace the o-ring, use a little grease or vaseline to lubricate it
before you reinstall the round cover. Hope this helps you.

Hector
1990 Carat 'Ursula'


On Sun, Apr 5, 2009 at 2:47 PM, Danny C <bruiserbabie@yahoo.com> wrote:

> I removed about 1 quart of ATF and cleaned off the tranny. I did notice
> there is a round 4" thing on the driver side of the tranny held on with what
> looks like a wire bail (like a  valve cover bail) thats where it seems to
> be leaking from. Is that a breather of some sort?
>
> *Danny C.*
> *'84 Westy (Vanny)*
> *'84 Deluxe (Blue Van)*
>
>
>
>
>
>