it's got a switch on the bottom, ( of the throttle body ) and a short black wire leading from the switch to a two prong connector.

----- Original Message ----- From: "Brendan Slevin" <totorovan@GMAIL.COM> To: <vanagon@GERRY.VANAGON.COM> Sent: Friday, April 10, 2009 11:35 PM Subject: Re: 1.9 to 2.1 conversion question

> Maybe I'm missing it, but I don't see any switch at all on the t-body. > This > is a 91 engine, did they have one? > > > > > On Fri, Apr 10, 2009 at 1:54 PM, Mike Collum <collum@myfairpoint.net> > wrote: > >> Brendan Slevin wrote: >> >>> Did you use the 2.1 Tbody, too? I'm trying to think >>> about what to do with the throttle switches if I use the 2.1 tbody. >>> >> >> Yes, I'm using the 2.1 throttle body and S boot. Like I said, I used the >> 2.1 intake all the way through. >> >> My '85 used the single TPS with the 1.9 engine so there was nothing to >> change there. All one would have to do, if they have the 2 switch setup, >> is >> to get rid of one pair of wires (to the second switch) and make sure they >> had the correct connector to the single switch. Electrically, either >> setup >> does the same thing. >> >> Mike >> >>