2009/4/11 Tom Hargrave <thargrav@hiwaay.net>: > The measurements are taken with the steering wheel centered and all readings > are referencing center. > > You could actually have one wheel toed in and the other toed out with a net > toe-in of 0. > Ah ok. So if I'm understanding this correctly, that would mean: wheels parallel to each other, but pointing "equally" slightly to the right or left? So then am I misunderstanding toe measurement? Toe in/out is difference between: measurement taken at same inner point of trailing portion of each wheel and measurement taken at same inner point of leading edge of each wheel? What I see in my minds eye, is one wheel straight, one pointing to right or left. i.e. : | \
Or is that impossible? Sorry for not getting this. I just evades me! Neil.
-- Neil Nicholson '81 VanaJetta 2.0 "Jaco" http://tubaneil.googlepages.com/ http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.