David; > > For the turn signal -- I'm assuming that turn signals and flashers work > normally, yes?
Yes. > > Unplug the 14-pin plug from the panel. Turn on ignition and use a test > light to verify +12 on pin 14.
Yes, and a buzzer under the dash sounds the entire time the test probe is connected to #14. At first I thought it might be a "feature" of this (new) test probe, but it is not. If no, go to next step. If yes, activate > turn signal and verify that test light blinks. Test light blinks. Buzzer (must be the seat belt buzzer) sound dies out as blinking commences and returns when blinking stops. Which makes me think, isn't there a difference between 82 and 83 buzzer/seat belt light electronics? A resistor somewhere? Jim |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.