Vanagon EuroVan
Previous (more recent) messageNext (less recent) messagePrevious (more recent) in topicNext (less recent) in topicPrevious (more recent) by same authorNext (less recent) by same authorPrevious page (April 2009, week 2)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Sat, 11 Apr 2009 14:35:09 -0700
Reply-To:     neil N <musomuso@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         neil N <musomuso@GMAIL.COM>
Subject:      Front Brake Hose Clearance Requirements
Content-Type: text/plain; charset=ISO-8859-1

Hi all.

In making some notes regarding new caliper/pads install on my '81, I re read "Note" on P 40.10 of Bentley. "If brake hose bracket is removed, clearance between wheel and hose must be checked when reinstalled." It specifies 1".

I removed this bracket on each side. I don't see any issue in terms of wheel clearance but on the driver side, the hose was quite close to spring when wheel turned full to left.

Is this an issue? I adjusted bracket slightly to allow some clearance. Was this incorrect and/or unneeded?

Here's the page with that part of my write up

http://tubaneil.googlepages.com/frontcaliperspads3

Entire write up

http://tubaneil.googlepages.com/frontcaliperspads

Thanks for any clarifications or critiques. Want to make notes of what I did as clear as possible.

Neil.

-- Neil Nicholson '81 VanaJetta 2.0 "Jaco"

http://tubaneil.googlepages.com/

http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.