Date:         Thu, 9 Apr 2009 17:35:06 -0400
Reply-To:     Jonathan Farrugia <jfarrugi@UMICH.EDU>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Jonathan Farrugia <jfarrugi@UMICH.EDU>
Subject:      Re: Brake line Flare Nut Threads + Antiseize Ok?
In-Reply-To:  <71d9cdf90904091431y577b6ff0ob9b6a00c6f43e457@mail.gmail.com>
Content-Type: TEXT/PLAIN; charset=US-ASCII; format=flowed

I have used anti seize for years in this application with no ill effects.
getting it between the tube and the nut is generally the most important.

jonathan

On Thu, 9 Apr 2009, Jake de Villiers wrote:

> I don't see that a teeny film would hurt but maybe better to just smear
> grease around the top of the opening after tightening up the fitting to keep
> moisture out.
>
> On Thu, Apr 9, 2009 at 1:54 PM, neil N <musomuso@gmail.com> wrote:
>
>> Hi all.
>>
>> Is it ok to apply a *little* anti seize to threads of new brake line
>> flare nuts?  (and possibly between tube and nut)
>>
>> Type A question, but was thinking along lines of why one would NOT use
>> nylon tape, so was wondering about anti seize.
>>
>> Thanks!
>>
>> Neil.
>>
>> --
>> Neil Nicholson '81 VanaJetta 2.0 "Jaco"
>>
>> http://tubaneil.googlepages.com/
>>
>>
>> http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines
>>
>
>
>
> --
> Jake
>
> 1984 Vanagon GL
> 1986 Westy Weekender "Dixie"
>
> Crescent Beach, BC
>
> www.crescentbeachguitar.com
> http://subyjake.googlepages.com/mydixiedarlin%27
>
>
>