Date:         Sun, 12 Apr 2009 14:29:05 -0700
Reply-To:     BenT Syncro <syncro@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         BenT Syncro <syncro@GMAIL.COM>
Subject:      Re: Another DIfferent Rear Brake Question: Kink in centerbore of
              drum
Comments: To: Jake de Villiers <crescentbeachguitar@gmail.com>
In-Reply-To:  <71d9cdf90904121423x6e5bb0b6g21e47172ba400e5a@mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1

On Sun, Apr 12, 2009 at 2:23 PM, Jake de Villiers <
crescentbeachguitar@gmail.com> wrote:

> Brand new, like out of the box?  That drum looks like some goombah tried to
> pry it off the axle from the centre hole.
>
> Either way, as long as it is over the minimum thickness, sits flush and is
> round, I'd go ahead and use it.
>

I wasn't there when the drum was installed. I only regret that I did not
notice the dings before the van left on the transporter. I do have
photographic proof before it left the shop in question. I did not get a
close look at the drums until after someone asked me to. I agree that
someone woudl have caused this when they pried during the course of install.


BenT