Date:         Thu, 16 Apr 2009 13:59:28 -0400
Reply-To:     David Beierl <dbeierl@ATTGLOBAL.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         David Beierl <dbeierl@ATTGLOBAL.NET>
Subject:      Re: CV boot or axle?
Comments: To: Don Hundt <dhundt@BENDBROADBAND.COM>
In-Reply-To:  <7DBAC318B4CA411C84B9DC64F9EC8D19@hundt8d78adec8>
Content-Type: text/plain; charset="us-ascii"; format=flowed

At 03:08 PM 4/15/2009, Don Hundt wrote:
>The grease on your (throwaway) clothes, the grease on the garage floor, the
>grease in your hair, the itchy nose that left a streak of grease on your
>face, the grease on the workbench, the greasy rags and old boots to dispose
>of, grabbing that one tool out of your box weeks later that you forgot to
>clean all the grease off .............All this if you are
>careful..................

Hey, it's not *that* bad.  Unless my memory is completely shot (a
possibility, I admit) a pair of nitrile gloves, a couple of
quart-size baggies with rubber bands to slip over the exposed
joints,  some of those nice blue Scot shop towels, a can or two of
Brakleen and a big coffee can with some mineral spirits will see you
right.  I've never ruined a set of (shop) clothes doing it, or
covered the neighborhood in grease,or gotten filthy beyond the usual
filthiness attendant on working with waterboxers.

:-)
d


  --
David Beierl - Providence RI USA -- http://pws.prserv.net/synergy/Vanagon/
'89 Po' White Star "Scamp"