Date: Fri, 24 Apr 2009 14:18:26 -0700
Reply-To: Scott Daniel - Turbovans <scottdaniel@TURBOVANS.COM>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Scott Daniel - Turbovans <scottdaniel@TURBOVANS.COM>
Subject: Re: A question about PTO's engine picture
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
reply-type=original
besides where the water pump goes, it's also the hole in the block through
which you access the wrist pin clips for the pistons on the left side of the
engine, for removing pistons and barrels. And it ain't fun to work on the
forward piston through that hoe either. The 'first' rear most piston is
easy .......
but to get the front piston out you have to work through this water pump
hole too.
scott
----- Original Message -----
From: "craig cowan" <phishman068@GMAIL.COM>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Thursday, April 23, 2009 8:34 PM
Subject: Re: A question about PTO's engine picture
> Hopefully your '71 baywindow engine did not have that. If it did, your
> cooling system probably didn't work properly.....
> That is indeed where the water pump goes.
>
> -Craig
> '85GL turned WESTY
> turning BOSTIG
>
> On Thu, Apr 23, 2009 at 10:54 PM, Rocket J Squirrel <
> camping.elliott@gmail.com> wrote:
>
>> On Peter's photo of his engine at
>>
>>
>> http://picasaweb.google.com/pnoceanwesty/JoesVanHeadWork42309?authkey=Gv1sRgCN6E5JDItYGEQA#5328073043878972530
>>
>> what's that swirly circular opening to the left of the pulley? Between
>> the
>> exhaust port and the pulley? About maybe 4'' in diameter? The only engine
>> I've worked on was the 1600 DP from my 71 aircooled baywindow. I don't
>> recognize that opening . . . water pump maybe?
>>
>> (The Bentley's is in the van.)
>>
>> --
>> Mike "Rocket J Squirrel" Elliott
>> 84 Westfalia: Mellow Yellow ("The Electrical Banana")
>> 74 Utility Trailer. Ladybug Trailer, Inc., San Juan Capistrano
>> Bend, OR
>> KG6RCR
>>
>>
>>
>> On 4/23/2009 7:19 PM Peter T. Owsianowski wrote:
>>
>> Just had to report:
>>>
>>> Been soaking a stuck head bolt on and off waiting for a valve press to
>>> be
>>> delivered. Got that press today, (man, does that make it easy!) got all
>>> the
>>> valves and keepers out and the stuck bolt came out with vice grips! Big
>>> sigh of relief. Couple of the valves were banged up, but have new ones
>>> on
>>> the way. Oddly enough, the end of the stuck bolt (inside the block) had
>>> been ground down. The heads were rebuilt about 55K ago by a VW
>>> dealership.
>>> Why would that be ground down on 4 sides?
>>>
>>> Anyway, looks like Joesvan will be tooling the down the road to Buses by
>>> the
>>> Beach if everything else goes back together well!
>>>
>>> Check out pics here:
>>>
>>> http://picasaweb.google.com/pnoceanwesty/JoesVanHeadWork42309?authkey=Gv1sRgCN6E5JDItYGEQA
>>> #
>>>
>>>
>>> Pete
>>> '79 Westy "Aardvark"
>>> '87 Westy "Joe's Van"
>>> WWW.Busesbythebeach.com
>>>
>>>
|