Vanagon EuroVan
Previous (more recent) messageNext (less recent) messagePrevious (more recent) in topicNext (less recent) in topicPrevious (more recent) by same authorNext (less recent) by same authorPrevious page (April 2009, week 4)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Sun, 26 Apr 2009 09:50:25 -0700
Reply-To:     Zoltan <thewestyman@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Zoltan <thewestyman@GMAIL.COM>
Subject:      Re: sick of replacing Control Arm Bushings every year
Comments: To: Ed <email99@BELLSOUTH.NET>
In-Reply-To:  <vanagon%2009042612210514@GERRY.VANAGON.COM>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
              reply-type=original

I can't add much to this thread. The ones I changed are good. But I'm not sure, if we are changing them to the same original part. It is a simple item and I don't see why it should make a noise. It did not make noise before I took it out, and it was real loose. So, is not Meyle or Fab the same as OEM? Zoltan

----- Original Message ----- From: "Ed" <email99@BELLSOUTH.NET> To: <vanagon@GERRY.VANAGON.COM> Sent: Sunday, April 26, 2009 9:14 AM Subject: Re: sick of replacing Control Arm Bushings every year

>I wonder how many upper control arm bushings are being damaged during spot > welding? > > I've replace the bushings twice and each time I've asked a very highly > recommended classic VW shop to do the minimum spot welding as to minimize > the amount of heat the rubber and teflon (or whatever) components would be > subjected to. Each time there were several fairly large spot welds, in my > opinion, and what appeared to be significant damage to the bushings. Each > time there wasn't much I could do so I installed the bushings, making sure > the appropriate shims were in place so excessive pressure was not created > by > the large mounting bolt. Each time they were squeaking and clunking after > ~5K miles. > > Do others think the bushings are being destroyed by excessive welding > heat? > > If anyone has had a good experience with control arm bushing replacement, > please let us know and indicate how large the welding spots were. Were > special precautions made to reduce the amount and duration of heat in the > welding process? Any other suggestions? > > What brand of bushings have people had good experiences with? > > Thanks all, > > Ed


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.