Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (April 2009, week 4)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Sat, 25 Apr 2009 16:00:28 -0700
Reply-To:     neil N <musomuso@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         neil N <musomuso@GMAIL.COM>
Subject:      Re: sick of replacing Control Arm Bushings every year
Comments: To: pickle vanagon <greenvanagon@gmail.com>
In-Reply-To:  <91c8f9760904251548s5447bbfen2f3b29745ad9b923@mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1

Check out a thread over on the Samba regarding upper arm bushings. Might be info regarding different manufacturers.

Neil.

On 4/25/09, pickle vanagon <greenvanagon@gmail.com> wrote: > My drivers side upper control arm bushings are screaming like crazy. These > are new Meyle bushings, installed a little over a year ago. The Meyle > bushings I had installed on the passenger side at the same time went bad > almost right away. I replaced those last summer with Febi bushings which > have held up so far (fingers crossed). > > I am careful when installing them (and know not to tighten them all the way > before lowering the van for example) and think a lot of the parts are just > bad. I have seen other people post similar frustrating experiences with > these bushings (including some who had problems with the Febi bushings). > > Does anyone know where to get a decent bushing? I've had bushings from > different list vendors that all went bad (they were all Meyle bushings, the > Febi bushings I had just picked up from a Flaps in a hurry). Is there a > chance I'll get better quality if I cough up the money to get them from the > dealer? (Presumably then there would at least be a warranty I could collect > on without too much hassle.) > > The worst part about changing these so often is that I can't even do it all > myself. Once I remove the control arm, I have to take it somewhere and pay > someone to press the new bushings in. > > Sorry for the griping! I just can't believe how problematic these bushings > seem to be! > > -Wes > '83 1.9l manual westy ("pickle") >

-- Neil Nicholson '81 VanaJetta 2.0 "Jaco"

http://tubaneil.googlepages.com/

http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.