Date:         Thu, 23 Apr 2009 23:02:04 -0500
Reply-To:     Jarrett Anthony Kupcinski <kpcnsk@YAHOO.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Jarrett Anthony Kupcinski <kpcnsk@YAHOO.COM>
Subject:      Re: rubber luggage rack washer
In-Reply-To:  <5ebe10a0904231308j54e0c578iffbe4191a36d1379@mail.gmail.com>
Content-Type: text/plain; charset=US-ASCII; format=flowed; delsp=yes

The hardware store wasn't much help.  The largest washers that even
came close to the right thickness were neoprene rather than rubber.
Haven't tried the FLAPS yet, though I am not optimistic.

-Jarrett
'89 Westy, Oly

On Apr 23, 2009, at 3:08 PM, Chris S wrote:

> I'd visit a local hardware store to see if they have any 1'' washers
> that would work.  They may not have metric sizes.
>
> On 4/22/09, Jarrett Anthony Kupcinski <kpcnsk@yahoo.com> wrote:
>> I'm looking for a source for the rubber washers used between the
>> luggage rack and roof brackets.  These have the approximate
>> dimensions: inner diameter 8mm, outer diameter 25mm, 7mm thick.
>> Thanks.
>>
>> -Jarrett
>> '89 Westy, Oly
>>
>
> --
> Sent from my mobile device
>
> Chris S.
> Disclaimer: "Death and serious injury may occur"