Date:         Thu, 7 May 2009 10:31:22 -0700
Reply-To:     neil N <musomuso@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         neil N <musomuso@GMAIL.COM>
Subject:      Re: Recent Maintenance Accomplished
Comments: To: John Rodgers <inua@charter.net>
In-Reply-To:  <4A00E386.10205@charter.net>
Content-Type: text/plain; charset=ISO-8859-1

On Tue, May 5, 2009 at 6:10 PM, John Rodgers <inua@charter.net> wrote:

> A serious issue arose with the discovery that the small, press fit
> bushing that holds the felt grease seal in place over the pilot bearing
> was missing. ....... Now oddly enough, VW
> does not list this part in the ETKA.  There is a picture, but there is
> no name given, nor is there a number given. Yet, this is a crucial part.
> if you want long life from your pilot bearing. No list vendor that I
> know of has them available fro any source. In my case, someone I knew
> made one for me.


Nice report John.

Anyone know if the air cooled 2.0 flywheel bushing would fit?

My memory is sketchy on this, but IIRC, I replaced mine when doing
pilot bearing etc. on my air cooled. It wasn't a problem to get this
part.

Just a thought.

Neil.
-- 
Neil Nicholson '81 VanaJetta 2.0 "Jaco"

http://tubaneil.googlepages.com/

http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines