Ben, Provided the rust isn't too deep, and that you haven't resurfaced before... I don't see why not. The machine shop will be able to access the damage, and make a good recommendation. Jack R. -----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Ben S Sent: Friday, May 08, 2009 3:50 PM To: vanagon@GERRY.VANAGON.COM Subject: rusty flywheel the 2.1L wbx engine that i'm about to install in my westy sat for a few years and the flywheel got pretty rusty. is there any reason i can't just have it resurfaced at a machine shop and then drop it in? end play is in spec. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.