Frank Condelli said- >> Nine times out of ten it's the brake or clutch switch. They need adjustment after all these years. Go figure ! << In my case, leaking brake fluid from the clutch slave cylinder dissolved the white plastic tabs on both switches, but there's still plenty of adjustment left to get them to work. And if you're on the road and don't want to take the time to get out the toolbox, shims are good for a temporary fix. Folded cardboard and duct tape worked for me. George/ATL |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.