You have the wrong spring installed. The blue one toward the front of the vehicle is possibly jamming the adjuster notched wheel. Those 2 blue springs come in a front and back. Upon close inspection you can see tell the difference, a mirror image. You are supposed to use one of each type per side. You have 2 of the same type on that side. The correct set will both hook from below. You may have done the same on the other side, using both of the other kind over there. Also, why did you shim the shoes so much? If too much shim is used the lower part of the shoes will be too wide for the drum to fit over unless you set the adjuster too loose. NO shim is better than too much shim. Mark
Troy wrote: > Here's a photo of the brake set-up. Let me know what you guys think I did wrong. > http://www.flickr.com/photos/9769028@N07/3551747853/ > > Troy > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.