Date:         Tue, 19 May 2009 18:23:19 -0600
Reply-To:     Bob Stevens <mtbiker62@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Bob Stevens <mtbiker62@GMAIL.COM>
Subject:      Re: Engine External Oil Cooler
Content-Type: text/plain; charset=ISO-8859-1

My experience with the aux oil cooler was with a SETRAB that had a fan built
in, so it was mounted in the base of the passenger D pillar. Very effective
at dropping the oil temps between 20-30 degrees F. This was for engine oil
cooling, not tranny.Model SET-FP 119
All connected with the Aeroquip fittings and braided stainless hoses.

bob

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.