Date:         Sat, 16 May 2009 12:02:56 -0400
Reply-To:     Don Hundt <dhundt@BENDBROADBAND.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Don Hundt <dhundt@BENDBROADBAND.COM>
Subject:      Re: GoWesty coolant repair kit vs SS pipes
Comments: To: Bob Stevens <mtbiker62@GMAIL.COM>
Content-type: text/plain; format=flowed; charset=iso-8859-1; reply-type=original

Plus, if done correctly, the hose should cover the rivets and be clamped
behind them. I haven't done this, but that is how I vizualize it.
Don
----- Original Message -----
From: "Bob Stevens" <mtbiker62@GMAIL.COM>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Saturday, May 16, 2009 11:46 AM
Subject: Re: GoWesty coolant repair kit vs SS pipes


> But a pop rivet is going to have a hole
> all the way through the center that may or may not be sealed.  So what am
> I
> missing?
>
> Loren,
> IIRC a section of the center "shaft" of the pop rivet stays with the
> rivet.
> That's what goes "pop", that shaft breaking off to leave a sealed hole,
> full
> of rivet.
>
> bob
>
>
>>
>>
>>
>
> __________ Information from ESET NOD32 Antivirus, version of virus
> signature database 4080 (20090515) __________
>
> The message was checked by ESET NOD32 Antivirus.
>
> http://www.eset.com
>
>
>