Date: Tue, 19 May 2009 18:11:33 -0700
Reply-To: Doug Noganav <vanagon@ASTOUND.NET>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Doug Noganav <vanagon@ASTOUND.NET>
Subject: Re: Removing engine the German way
Content-Type: text/plain; charset="iso-8859-1"
Great idea, always easy to improve on stuff after the original author did
all the heavy brain work to
come up with the idea in the first place. Frankly, I would have never
thought of it so right on!
Harbor Freight now sells several hand crank wenches that have an auto brake
so you will not have to possibility
of a runnaway wench when you un lock it.
Secondly it would be nice to see the wench higher up with some additional
carpentry.
Great tip!
Doug
----- Original Message -----
From: "pdooley" <psdooley@VERIZON.NET>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Tuesday, May 19, 2009 5:48 PM
Subject: Re: Removing engine the German way
> The winch is a pretty cool idea.
> I have used a cherry picker before and it wasn't that bad, but the winch
> does seem to be superior.
>
> Also, you could use a furniture dolly under the motor to
> facilitate/eliminate the dragging process once motor is free.
>
>
> -----Original Message-----
> From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
> Chris Lisica
> Sent: Tuesday, May 19, 2009 7:58 PM
> To: vanagon@GERRY.VANAGON.COM
> Subject: Re: Removing engine the German way
>
> I will attest to Zoltan's method, seeing as how he taught it to me! It is
so
> easy, it's ridiculous. I couldn't imagine another way of doing it.
>
> Pictures of the winch, I dropped this engine by myself in a couple of
hours
> at night:
> http://wavanagon.googlepages.com/87westfaliaenginework
>
> -chris
>
> On Tue, May 19, 2009 at 3:05 PM, Zoltan <thewestyman@gmail.com> wrote:
>
> > My Lord! I don't believe that I am reading this. What a terrible
advice
> > to
> > give. Taking the engine out is about ten times easier that taking the
> > exhaust system off while its in the car. The whole thing must come out
> > all-together. Use the same system I invented and it's on TheSamba.com.
> > Engine lifter that works with a winch. Don't buy it if you can't afford
> > it,
> > make one yourself. Don't even think of using a "cherry picker". That
> > would
> > also make it ten times harder and longer.
> > Volks, we have been throught this a few times. It should not take
longer
> > than twenty minutes once the hoses and electricals are out of the way.
> And
> > yes, put some blocks under the tranny when the engine is ready to be
> pulled
> > from it. Then lower it to a big drip tray that you can slide out by
> > pulling
> > on a rope that is attached to it through a couple of little holes. Same
> > way
> > it goes back in. As easy as it can get. You would love to work on the
> > engine this way.
> > Zoltan
> >
> > ----- Original Message -----
> > From: "Mark Dearing" <VWBrain@AOL.COM>
> > To: <vanagon@GERRY.VANAGON.COM>
> > Sent: Tuesday, May 19, 2009 2:22 PM
> > Subject: Re: Removing a water cooled engine from vanagon. Ben?
> >
> >
> > hey John It isn't as hard as an aircooled. hardest thing is taking
the
> >> exhust off without breaking the studs. remove the exhust first then the
> >> air
> >> cleaner housing , wires(mark these) , fuel line.throttle cable. , then
> all
> >> is
> >> left is the 4 main bolts and nuts and croossbar bolts. be sure to
support
> >> thre tranny when taking the engine out. later mark d
> >> **************An Excellent Credit Score is 750. See Yours in Just 2
Easy
> >> Steps!
> >> (
> >>
>
http://pr.atwola.com/promoclk/100126575x1221823248x1201398651/aol?redir=http
> ://www.freecreditreport.com/pm/default.aspx?sc=668072&hmpgID=62&bcd=May
> >> Excfooter51609NO62)
> >>
> >
>
>
> --
> Chris
> 88 Vanagon GL (daily driver)
> 87 Westfalia (in progress)
> http://wavanagon.googlepages.com/
|