Can the GoWesty kit easily be installed while the engine is in? or is better to do it when the engine is out? Robert On May 18, 2009, at 7:38 PM, Warren Lail wrote: > I installed the GoWesty kit more than three years and 70,000 miles > ago and I > have had no problems whatever. The inserts in my coolant pipes had > almost > slipped out entirely. I used a hair dryer to heat the plastic > thoroughly > and then using a piece of wood to dampen the blows, I hammered them > back > into place. I then installed the GoWesty repair kit and that was > the end of > that story. So far, so good. > > Best, > > Warren in Santa Fe > 88 Westy |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.