Date:         Wed, 27 May 2009 06:23:20 EDT
Reply-To:     RAlanen@AOL.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Frank Condelli <RAlanen@AOL.COM>
Subject:      Replacing 82 windshield, which DOESN'T have moulding
Content-Type: text/plain; charset="US-ASCII"

In a message dated 27/05/2009 12:05:56 A.M. Eastern Daylight Time,
LISTSERV@GERRY.VANAGON.COM writes:

        That molding is not  needed.  We've been over this a gazillion
times.  Check the  archives.  You have two choices.  Use the seal with the
groove  for the molding and do not install a molding or use  a windshield seal
without the groove.



>>>>>Safelite autoglass wants to charge almost 70 for  the moulding around
the glass rubber. are there any years with the same size  window that
doesn't need that  moulding???<<<<<<<<<<





Cheers,

Frank  Condelli
Almonte, Ontario, Canada
'87 Westy & Lionel Trains (_Collection for sale_
(http://frankcondelli.com/trainsal.htm) )
_Frank Condelli &  Associates_ (http://frankcondelli.com/busindex.html)  -
Vanagon/Vanagon Westfalia Service in the Ottawa Valley
_Vanagon Stainless Steel Exhaust  Systems_
(http://frankcondelli.com/exhaust.htm)
_BusFusion_ (http://www.busfusion.com/bfhome.htm)  a  VW Camper camping
event, Almonte, ON, June 11 ~ 14,  2009