Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (May 2009, week 4)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Wed, 27 May 2009 08:05:43 EDT
Reply-To:     VWBrain@AOL.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Mark Dearing <VWBrain@AOL.COM>
Subject:      Re: AMC valves, Boston Bob
Comments: To: RAlanen@aol.com
Content-Type: text/plain; charset="US-ASCII"

In a message dated 5/27/2009 6:17:36 A.M. Eastern Daylight Time, RAlanen@AOL.COM writes:

DITTO, Same story here !

>>>>>I spent a bunch of time on the phone with Bob talking about this subject as well, but I believe all of this fear and loathing about the AMC valves is due to a bad batch of these heads back about 6 or 7 years ago. I have never had a failure like the one Bob always warned me about and I never changed the valves from the stock ones. Recently I had a pair of AMC heads that I installed on an engine about two years ago come back into my possession (engine threw a rod). The heads had about 18k miles on them. I took the heads to a machine shop to have them checked and a valve job done before selling the heads to a list member. I asked the machine shop about the condition of the valve keepers, grooves on the valve stems, etc. He said that he had inspected them and they were like new condition and that they valves themselves were also in like new condition. I can say that I have never had an AMC head fail in 11 years of installing them. I have never had one that I have sold to a customer fail due to a bad valve either. Anything can fail if you abuse it, or improperly install it, or don't correctly adjust the valves, etc. However I have never found the stock AMC valves to have any issues. If you want to spend extra money on "better" valves and install them only to have them fail (I have known this to happen) that is your choice. However the stigma against using the AMC heads out of the box is totally unfounded as far as I am concerned.<<<<<<

Cheers,

Frank Condelli Almonte, Ontario, Canada '87 Westy & Lionel Trains (_Collection for sale

hey Frank I have had the same results. I do take them apart and inspect everything. My own 85 westy was built by me in 1995 using out of the box AMC heads. still running. later mark dearing **************Dinner Made Easy Newsletter - Simple Meal Ideas for Your Family. Sign Up Now! (http://pr.atwola.com/promoclk/100126575x1221991367x1201443283/aol?redir=http:%2F%2Fad.doubleclick.net%2Fclk%3B215225819%3B37274678%3Bs% 3Fhttp:%2F%2Frecipes.dinnermadeeasy.com%2F%3FESRC%3D622)


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.