Date:         Thu, 28 May 2009 08:04:04 -0400
Reply-To:     Ken Wilford <kenwilfy@COMCAST.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Ken Wilford <kenwilfy@COMCAST.NET>
Subject:      Re: Rear Shocks
Comments: To: Stephen Cebula <sfcebula@YAHOO.COM>
In-Reply-To:  <484110.58731.qm@web111405.mail.gq1.yahoo.com>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

The rear shocks are easy, however they can be a little tricky.  It is
just two bolts and you just remove them, put in the new shock and
tighten.  You would think that would be it.  However I have had problems
with the rear shocks becoming loose soon after they are installed.  I
don't know if something jams and makes the bolts seem tight when they
aren't or what.  Anyway, take the van for a short drive and then recheck
the shock tightness.  Retighten as needed.  That should be it.

Ken Wilford
John 3:16
www.vanagain.com


Stephen Cebula wrote:
> Hi Everybody,
> Thanks for all your input.  I'm still trying to get my vanagon through Md inpection.  I just have a few more items left to take care of and I can finaly drive it:)
>
> I need to replace the rear shocks.  It looks like a fairly simple job but I've never done it before.  Is it just a matter of jacking it up, unbolt and bolt?  Any advice?
>
> I need to do that, add a rear side marker, fix a dim taillight, and get my brake warning light to work.  If I can do all that in just a few hours, then I just might have it for the weekend which would be sweet!
>
> Thanks again,
> Steve
>
>
>
>
>