Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (May 2009, week 4)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Thu, 28 May 2009 15:19:45 -0700
Reply-To:     Scott Daniel - Turbovans <scottdaniel@TURBOVANS.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Scott Daniel - Turbovans <scottdaniel@TURBOVANS.COM>
Subject:      Re: I-4 coversion developing power troubles
Comments: To: neil N <musomuso@gmail.com>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
              reply-type=original

I knew you wouldn't mind Neil. he has an ABA you think too, right ? and being a 96 it should be OBD-II. Hopefully the OBD-II connector port is there ......and things will start to make sense pretty soon.

I mentioned clogged cat or exhaust for our I-4 buddy here .............and, I just found an OE style german cat on a vanagon ..... when you look in either end, it looks good, but if you take it off the car, and shake it, it's obviously failing and turning into loose pieces..... but it's between the ends of the cat material, where you can't see it. I bet that would have failed and resulted in low power in a few thousand miles max. Glad we caught it. scott

----- Original Message ----- From: "neil N" <musomuso@gmail.com> To: "Scott Daniel - Turbovans" <scottdaniel@turbovans.com> Cc: <vanagon@gerry.vanagon.com> Sent: Thursday, May 28, 2009 10:44 AM Subject: Re: I-4 coversion developing power troubles

> On Wed, May 27, 2009 at 6:34 PM, Scott Daniel - Turbovans > <scottdaniel@turbovans.com> wrote: >> that was misinformation about looking under and at the left side of the >> block. >> that's all you will see there .......cast-in words saying '2.0. and >> 'mexico' >> . >> look on the other side, just below the head .......... >> on top of the block ........... >> right above the oil filter flange ...... >> stamped into a machined small area . >> Probably is going to say ABA. >> scott >> www.turbovans.com >> >> > > > Thanks for the correction Scott. > > Neil. (Master of MisInformation <grin>) > > > -- > Neil Nicholson '81 VanaJetta 2.0 "Jaco" > > http://tubaneil.googlepages.com/ > > http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.