Date:         Fri, 22 May 2009 17:40:17 -0400
Reply-To:     Ken Wilford <kenwilfy@COMCAST.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Ken Wilford <kenwilfy@COMCAST.NET>
Subject:      Re: 2.1l vacuum readings?
Comments: To: David Beierl <dbeierl@ATTGLOBAL.NET>
In-Reply-To:  <4a15e734.e203be0a.72ea.36da@mx.google.com>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

I have found between 12-17 inches/mercury at hot idle is normal.  If you
have less try adjusting your valves and check again.

Ken Wilford
John 3:16
www.vanagain.com


David Beierl wrote:
> Can someone remind me what sort of manifold pressure (vacuum)
> readings I should be seeing on a 2.1l MV engine?
>
> Thanks,
>
>  --
> David Beierl - Providence RI USA --
> http://pws.prserv.net/synergy/Vanagon/
> '89 Po' White Star "Scamp"
>

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.