Date:         Fri, 12 Jun 2009 02:16:37 -0400
Reply-To:     Rick Foster <redhawkf@PEOPLEPC.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Rick Foster <redhawkf@PEOPLEPC.COM>
Subject:      Fw: Re: Help with 12v Dometic wiring
Content-Type: text/plain; charset=UTF-8

-----Forwarded Message-----
>From: Rick Foster <redhawkf@peoplepc.com>
>Sent: Jun 11, 2009 12:11 AM
>To: "vanagon@gerry.vanagon.com" <vanagon@gerry.vanagon.com>
>Subject: Re: Help with 12v Dometic wiring
>
>Thanx Mark and Robert for your clarity!  And interesting to learn about that starter solenoid ground route.
>
>Here's where I'm at:
>   - Checked voltage at D spade on my alt and got 0.12v with the engine   running.
>    -  The relay was not wired correctly.
>
>So I plan to get an aux bat wiring kit from GW and a new relay.  GW has a 'second bat relay' that looks remarkably similar to what Bently calls 'frig heater relay'.  Are these indeed the same?
>
>  And get a rebuilt Bosch alt ($91 at my FLAPS for an Autolite brand Bosch rebuild, comes with a lifetime warranty and a 24 month '24/7 Roadside assistance' garrunty!).   Does sound like it will be my fix?
>
>  Can my alt be fixed to provide current to the blue wire spade and keep it for a good spair for the cost of the core charge? It does keep my starter bat up.
>
>thanx again to this great list!
>
>Rick Foster
>85 Westy
>
>________________________________________
>PeoplePC Online
>A better way to Internet
>http://www.peoplepc.com


________________________________________
PeoplePC Online
A better way to Internet
http://www.peoplepc.com