Date:         Mon, 8 Jun 2009 23:44:48 -0700
Reply-To:     neil N <musomuso@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         neil N <musomuso@GMAIL.COM>
Subject:      Re: Tie Rod end removal/Control arm bushings
Comments: To: Scott Daniel - Turbovans <scottdaniel@turbovans.com>
In-Reply-To:  <04e001c9e8c6$2a47b180$6801a8c0@PROSPERITY>
Content-Type: text/plain; charset=ISO-8859-1

On Mon, Jun 8, 2009 at 10:49 PM, Scott Daniel -
Turbovans<scottdaniel@turbovans.com> wrote:
...
>
> other methods -
.....

Troy.

Another method. (thank you archives)

Pittman arm puller. Can't recall exact size, but if you get the right
size, it can be used on tie rods (presses them out). Size info should
be in archives.

Neil.


--
Neil Nicholson '81 VanaJetta 2.0 "Jaco"

http://tubaneil.googlepages.com/

http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.