Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (June 2009, week 2)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Wed, 10 Jun 2009 10:55:38 -0700
Reply-To:     David Kao <dtkao0205@YAHOO.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         David Kao <dtkao0205@YAHOO.COM>
Subject:      What to do with my LP Tank
Content-Type: text/plain; charset=iso-8859-1

While we are on this subject I have a question regarding my LP tank on my 83.5 Westy. I believe my LP tank was filled with LP only once despite it is 26 years old. The PO filled it within the first 3 months after he bought the Westy new. The LP has never been used up. I have taken over the Westy for more than a decade and I used it only a few times. There is still some unknown amount of it remaining in the tank. What should I do if I intend to use it more seriously? I don't suppose that I should simply fill it up again and assume everything will be fine. I really know nothing about this stuff. The Westy has lived all its life in California and there is hardly any rust anywhere on the chassis, including the LP tank. I did once light up the fridge and ran it for a good 8 hours or so. The fridge was only a little cooler, not impressive to me. This was probably 10 years ago. I also fired up one of the cooker maybe 5 years ago to see that it still worked. I am wondering if I am carrying a time bomb on my Westy. What should I do about it? Thanks, guys. David --- On Wed, 6/10/09, David Beierl <dbeierl@ATTGLOBAL.NET> wrote: > From: David Beierl <dbeierl@ATTGLOBAL.NET> > Subject: Re: LP Regulator Life Expectancy?-be careful! > To: vanagon@GERRY.VANAGON.COM > Date: Wednesday, June 10, 2009, 10:14 AM > At 12:41 PM 6/10/2009, neil N wrote: > >How does the average DIY home owner type guy pressure > test it? Air compressor? > > NO!  Use water for a pressure test; that way if the > tank fails you > won't have a sudden release of stored-up energy (aka > explosion) with > pieces of tank parting your hair.  But in general I > suspect that the > average DIY home owner type guy would take it to a > pro.  I'd start by > talking to the local welding-gas outfit -- they may offer > that > service since they deal every day with high-pressure tanks > that need > certifying. > > >   -- > David Beierl - Providence RI USA -- http://pws.prserv.net/synergy/Vanagon/ > '89 Po' White Star "Scamp" >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.