Use a pair of nippers, similar to: http://www.harborfreight.com/cpi/photos/38400-38499/38496.gif Maybe a bit smaller than that example. Be sure the clamps are where you want them, once you crimp them they are not re-usable and have to be cut off.
Allan On Fri, 19 Jun 2009 10:34 -0400, "Paul Guzyk" <paullist08@GUZYK.COM> wrote: > A friend ordered the GoWesty fuel line kit. It comes with this style of > clamp; > > http://tinyurl.com/mo5th9 > > GoWesty says to use Bullnose pliers...just standards pliers? > > If you have used this style of fuel line clamp, what pliers did you find > worked well? Or is there a specific tool that is designed for these > clamps? (please post a photo/model number of the tool if you can) > > I usually use the kit from Van-Cafe.com which has screw clamps... |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.