VANAGON archives -- June 2009, week 3 (#135)

Date:         Wed, 17 Jun 2009 12:33:21 -0700
Reply-To:     Scott Daniel - Turbovans <scottdaniel@TURBOVANS.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Scott Daniel - Turbovans <scottdaniel@TURBOVANS.COM>
Subject:      Re: 1.9 Tranny = 2.1?
Comments: To: Stephen Cebula <sfcebula@YAHOO.COM>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
              reply-type=original

short answer is 'yes.'
at the most, you might have to add a spacer ( about 1/4 inch thick ) where
the shift linkage bolts to the side of the trans,
or you may not.  But either way ........not a big deal.

and I assume you are talking manual trans, and not automatic trans.
Scott
www.turbovans.com


----- Original Message -----
From: "Stephen Cebula" <sfcebula@YAHOO.COM>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Wednesday, June 17, 2009 9:45 AM
Subject: 1.9 Tranny = 2.1?


> Can I use an `86 to `91 Transmission for my `85 1.9?
> I'm in need and there seems to be more later models available.
> Thanks,
> Steve

Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.