Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (June 2009, week 4)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Mon, 22 Jun 2009 22:07:54 -0700
Reply-To:     Scott Daniel - Turbovans <scottdaniel@TURBOVANS.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Scott Daniel - Turbovans <scottdaniel@TURBOVANS.COM>
Subject:      Re: Alternator hum or whine
Comments: To: Joe Fernandez <jfride@GMAIL.COM>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
              reply-type=original

a simple 'first check' is to remove the alternator belt from the alternator, and spin the alt. by hand, and see how it feels, and how loose the bearings are. I find quite a few 2.1 waterboxer alternators 'running in normal service' ...........with quite loose bearings in them.

also check the mounting below the alternator - those are famous for getting loose, breaking studs, etc. you could also remove the alternator from the engine, then remove the brush package/voltage regulator, and see how worn the brushes are.

It's not clear which of the 3 types of vanagon you have ........ waterboxer, air-cooled, or diesel. They all use an alternator, but knowing year version and model might make it easier for some people to help you.

----- Original Message ----- From: "Joe Fernandez" <jfride@GMAIL.COM> To: <vanagon@GERRY.VANAGON.COM> Sent: Monday, June 22, 2009 7:47 PM Subject: Alternator hum or whine

> Hi listees- > > I recently noticed a hum/whine from my van when I turn on the lights. Very > clear, I can turn the lights on/off and hear the whine turn on and off. It > sounds like the alternator when I poke around the engine compartment. > > The archives show some alternator bearing discussions that mention a whine > (also water pump, but mine's less than 5k old, replaced by van-cafe). Any > suggestions for next steps? Check for play at the pulley? Take it apart > and > rebuild? Ignore? > > Charging voltage is normal, around 13.8 volts. '86 westy weekender with > 77k > miles, original engine/heads. > > Thanks all. > Joe > Santa Cruz, CA


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.