Date:         Tue, 30 Jun 2009 09:08:03 -0700
Reply-To:     Jake de Villiers <crescentbeachguitar@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Jake de Villiers <crescentbeachguitar@GMAIL.COM>
Subject:      Re: Spacers for rear-bearings normal part of kit?
Comments: To: RAlanen@aol.com
In-Reply-To:  <c7a.57f2fbdc.377b39ff@aol.com>
Content-Type: text/plain; charset=ISO-8859-1

Right on Frank - I was kinda feeling that answer in the back of my mind.

Jens, did you open it up to have a look?

On Tue, Jun 30, 2009 at 2:50 AM, Frank Condelli <RAlanen@aol.com> wrote:

> In a message dated 29/06/2009 2:59:16 P.M. Eastern Daylight Time,
> LISTSERV@GERRY.VANAGON.COM writes:
>
>        Yes you can as the nut will  bottom out on the end of the splines.
>
>
>
> >>>>>I don't think you could torque the nut without  a spacer but its been
> a
> while...<<<<<<<
>
>
>
>
>
> Cheers,
>
> Frank  Condelli
> Almonte, Ontario, Canada
> '87 Westy & Lionel Trains (_Collection for sale_
> (http://frankcondelli.com/trainsal.htm) )
> _Frank Condelli &  Associates_ (http://frankcondelli.com/busindex.html)  -
> Vanagon/Vanagon Westfalia Service in the Ottawa Valley
> _Vanagon Stainless Steel Exhaust  Systems_
> (http://frankcondelli.com/exhaust.htm)
> _BusFusion_ (http://www.busfusion.com/)  a VW Camper  camping event,
> Almonte, ON, June 11 ~ 14,  2009
>



--
Jake

1984 Vanagon GL
1986 Westy Weekender "Dixie"

Crescent Beach, BC

www.thebassspa.com
www.crescentbeachguitar.com
http://subyjake.googlepages.com/mydixiedarlin%27