Yeah what I've put out for brakes, pads, bolts and machining will be close to $600 if not more. But I got Brembo disks and the kit comes with Chinese made disks that are not good, or at least that's what has been reported to me. I'd drill the holes myself as was suggested but I think I'd be lucky if they would go on the van if I did. Mike
On 6/30/09 7:16 PM, "Max Wellhouse" <dimwittedmoose@cfu.net> wrote: > FWIW I got a quote of $25 to get all 20 of my MB knock off alloy > wheel holes reamed out from 12mm to 9/16" by a local tooling > shop. You ARE talking about 4 holes getting drilled right? Maybe > there's welding involved who knows? > > For the time you've put into chasing down the new audi parts etc, and > the $130 for this trip to the machine shop, that $600 kit is sounding > better and better. > > YMMV > > > DM&FS > > At 07:42 PM 6/30/2009, Mike Miller wrote: >> Vanners, >> >> I'm in the final stages of converting my '87 syncro to Audi G60 brakes. >> >> Took the calipers to a machine shop to get the mounting holes rebored to the >> correct spacing. Guy says $130. >> >> This sound about right or am I missing something here? >> >> Mike > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.