Date:         Fri, 3 Jul 2009 08:56:21 -0700
Reply-To:     mark drillock <mdrillock@COX.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         mark drillock <mdrillock@COX.NET>
Subject:      Re: Seat/Bed Swap
Comments: To: Brendan Slevin <totorovan@GMAIL.COM>
In-Reply-To:  <48bd05410907030835u33289d59w4569daba9432b881@mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

If you won't drill holes it won't work. The 2 hinge straps need holes
and there are I think at least 2 of the base holes than can be drilled
and bolted through the floor.

Mark

Brendan Slevin wrote:
> So I was trying to figure out if I can swap the Z-Bed from the 84 Wolfsburg
> in to the 87 Syncro which only has the fold forward seat.  It looks like the
> syncro seat will bolt right into the 84, no problem.  But the Syncro lacks
> (I think) the threaded holes to bolt the seat bed to the floor of the van
> and to the rear deck of the van.  Is it possible at all to fit the Z-bed to
> the syncro?  I don't want to do much in the way of drilling/fabricating.
>
> Brendan
>