Date:         Fri, 3 Jul 2009 09:25:35 -0700
Reply-To:     Brendan Slevin <totorovan@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Brendan Slevin <totorovan@GMAIL.COM>
Subject:      Re: Seat/Bed Swap
In-Reply-To:  <4A4E2A25.2010904@cox.net>
Content-Type: text/plain; charset=ISO-8859-1

Ah ha!  That makes sense from what I've looked at in the vans.  I think I'll
wait until I find a good z-bed in gray that matches instead of fitting the
blue zbed from the 84.

Thanks!

Brendan

On Fri, Jul 3, 2009 at 8:56 AM, mark drillock <mdrillock@cox.net> wrote:

> If you won't drill holes it won't work. The 2 hinge straps need holes and
> there are I think at least 2 of the base holes than can be drilled and
> bolted through the floor.
>
> Mark
>
>
> Brendan Slevin wrote:
>
>> So I was trying to figure out if I can swap the Z-Bed from the 84
>> Wolfsburg
>> in to the 87 Syncro which only has the fold forward seat.  It looks like
>> the
>> syncro seat will bolt right into the 84, no problem.  But the Syncro lacks
>> (I think) the threaded holes to bolt the seat bed to the floor of the van
>> and to the rear deck of the van.  Is it possible at all to fit the Z-bed
>> to
>> the syncro?  I don't want to do much in the way of drilling/fabricating.
>>
>> Brendan
>>
>>