Date: Mon, 20 Jul 2009 23:25:24 -0500
Reply-To: Tom Hargrave <thargrav@HIWAAY.NET>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Tom Hargrave <thargrav@HIWAAY.NET>
Subject: Was Inject grease, now where is the Vanagon content
In-Reply-To: <8862824924FC4E0AA2723A74B97FDD91@hundt8d78adec8>
Content-Type: text/plain; charset="us-ascii"
Don,
The relevant Vanagon content is the discussion about bearings & grease.
I did not even mention the danger of mixing incompatible grease & since you
don't know what's in your sealed bearings, how do you even know what to put
in them! The carriers in some incompatable greases can combine and
completely liquefy, causing all of the grease to run out of your bearings!
This is why you completely remove old grease from non-sealed wheel bearings
before re-packing them.
Mike S took it upon himself to throw a jab at my business which really is
suffering because we are buried with orders and we are shipping late. It's
not good but better than the opposite problem!
Thanks,
Tom Hargrave
Our Web Sites:
www.kegkits.com
http://www.kegkits.com/JABF/
www.stir-plate.com
www.andyshotsauce.com
256-656-1924
-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@GERRY.VANAGON.COM] On Behalf Of
Don Hundt
Sent: Monday, July 20, 2009 11:09 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: Inject grease into rear wheel bearings w/o disassembly?
Where is the Vanagon content in THIS statement? Is it friday already? What
was gained by posting a link to a completely unrelated forum, discussing a
topic not even remotely vanagon related? Does that somehow make Tom not
eligible to post here? I personally enjoy the free flow of VANAGON related
thoughts here, and I'd hope that most listmembers would correct a mistake
with a smile, not a fist.
YMMV,
Don
Mike S. said:
"Shouldn't you be tending to business, instead of spreading
disinformation and advertising?"
----- Original Message -----
From: "Mike S" <mikes@FLATSURFACE.COM>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Monday, July 20, 2009 10:18 PM
Subject: Re: Inject grease into rear wheel bearings w/o disassembly?
> At 09:30 PM 7/20/2009, Tom Hargrave wrote...
>>No, I was talking about bearings in general. But even the rear wheel
>>bearing
>>has a pre-load.
>
> Which can't be adjusted, as you suggested.
>
>>Sealed bearings are lubricated for the life of the bearing.
>
> That's like a lifetime warranty - it expires as soon as the product
> does, so what's the point?
>
> Vanagon bearings, both front and rear, can be repacked with grease
> (even though there are seals), your comment is a non-sequitur.
>
>>Our Web Sites:
>>www.kegkits.com
>
> Shouldn't you be tending to business, instead of spreading
> disinformation and advertising?
> http://www.homebrewtalk.com/f14/lesson-learned-buying-kegkits-113969/
>
> __________ Information from ESET NOD32 Antivirus, version of virus
> signature database 4262 (20090720) __________
>
> The message was checked by ESET NOD32 Antivirus.
>
> http://www.eset.com
>
>
>
|