Robert Start by making sure you have power to the switch with key on. I just did a bunch of work on my suddenly non functioning power window. Turns out the motor had become dirty and gunked up.Maybe some water getting in. I could hear the clicking at the motor when I pushed the window button so I knew power was getting through. I took it apart and cleaned it and lubed it and it works fine now. It's very tight in there but not hard to do. Good luck. Merv. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.