Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (July 2009, week 5)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Wed, 29 Jul 2009 14:12:49 -0500
Reply-To:     John Rodgers <inua@CHARTER.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         John Rodgers <inua@CHARTER.NET>
Subject:      Re: bought a syncro
Comments: To: Alistair Bell <albell@SHAW.CA>
In-Reply-To:  <B5FA7600-C52B-4BE2-807E-010E279BA636@shaw.ca>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

Alistair -

Sounds like a deal/steal to me!

And to be able to make your own van/syncro parts .... What a concept!

Good luck with your project.

John Rodgers 88 GL Driver

Alistair Bell wrote: > Hi, > > some of you may know i had my '82 westy t-boned by excavator during > snow storm last winter. I kept the van, (boy its tough not driving > it, really missed the old van) thinking I may find a passenger syncro > and do the hellacious westy stuff swap. > > Well i did finally find one, '86 pas. syncro. if fair shape for age, > rust in spots but curiously localised. Has a/c, webasto heater, a > spare wasserboxer (!), upgraded lights, and good tires. > > doesn't have power locks or power windows. > > The price was right, and i fully expect to find some surprises. Right > off the probs are: > > engine :) > driveline vibe (that seemingly common fault) > some rust that need prompt attention (nothing above belt line, very > limited seam rush, no bottom edge of body rust, but a small but bad > bit at corner of driver door) > horn ring broken > broken sway bar drop link > a/c not charged > webasto - unknown > > > I might turn out to be a bag of hurt, but i had a good feeling about > it and the owner and i did so much want one, really fed up with > getting stuck on some logging roads etc. > > > Coincidentally, I found a great deal on a 1979 Taiwanese 10X24 metal > working lathe and a bunch of accessories. I can't believe i have > achieved 2 dreams in a single week :) > > hey, dreaming about a lathe may seem crazy but i dont care... and > besides i might be able to make parts for the syncro :) > > > Alistair > now with: > > '72 westy > '82 westy > '86 syncro > '95 Subaru Legacy AWD > '84 Golf > >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.