Date: Tue, 4 Aug 2009 12:19:17 -0700
Reply-To: Scott Daniel - Turbovans <scottdaniel@TURBOVANS.COM>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Scott Daniel - Turbovans <scottdaniel@TURBOVANS.COM>
Subject: Re: replacing brake lines
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
reply-type=original
sure, you can just loosen the fitting and let it drip all over .
lol.
brake fluid eats paint of course. It's very nicely water-soluble though.
you can suck what you can out of the master cylinder reservoir with a
turkey baster if you want, you won't get it all out. That screen in the
filler hole of the res comes out, just dig it out of there carefully.
splices in brake lines are sort of an 'not really official repair.
You can get away with it, but ultimately, it's not really a correct repair.
and it depends on what type of splice.
If you have a nice solid junction block and you have the right double flair,
or whatever is exactly correct, that would be as good as stock.
If using a single flair, or something 'less' .........maybe not so good.
Scott
www.turbovans.com
----- Original Message -----
From: "Mark" <mbrush@GMAIL.COM>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Tuesday, August 04, 2009 11:35 AM
Subject: Re: replacing brake lines
> Thanks for all the advice - it sounds pretty simple so I think I'll go for
> it. I found the leak - it's in the line that leads to the rear junction.
> Is it pretty simple to put a splice in if need be? Also, do I need to
> empty
> the brake fluid before I remove the junction? Or do I just loosen the nut
> and let the brake fluid drip out (hopefully not all over my clothes or
> face)?
>
> Mark
>
> 1990 Westy, manual 2.1
>
> On Tue, Aug 4, 2009 at 6:24 AM, Frank Condelli <RAlanen@aol.com> wrote:
>
>> In a message dated 03/08/2009 8:32:53 P.M. Eastern Daylight Time,
>> LISTSERV@GERRY.VANAGON.COM writes:
>>
>> Not much to it. You will need a tube bender, flaring tool for
>> double bubble flare ends, brake line, the best you can buy, and new
>> male
>> metric threaded nipples. Take off the old line and make a duplicate
>> then
>> install it, one by one
>>
>> .
>>
>> >>>>>Anyone have any tips on replacing brake lines? Searched the forum,
>> but
>> didn't see much. I've watched some YouTube videos on how to do it:
>> _http://www.youtube.com/watch?v=-Im2NVo1aw0&NR=1&feature=fvwp_
>> (http://www.youtube.com/watch?v=-Im2NVo1aw0&NR=1&feature=fvwp) - didn't
>> know
>> if there were better resources.
>>
>> I have a leak in a line that goes from the left rear to the rear
>> connector.
>> I'm finding rust in other parts of the system and I'm thinking of
>> replacing
>> with all new lines.<<<<<
>>
>>
>>
>>
>>
>>
>>
>> Cheers,
>>
>> Frank Condelli
>> Almonte, Ontario, Canada
>> '87 Westy & Lionel Trains (_Collection for sale_
>> (http://frankcondelli.com/trainsal.htm) )
>> _Frank Condelli & Associates_
>> http://frankcondelli.com/busindex.html) -
>> Vanagon/Vanagon Westfalia Service in the Ottawa Valley
>> _Vanagon Stainless Steel Exhaust Systems_
>> (http://frankcondelli.com/exhaust.htm)
>> _BusFusion_ (http://www.busfusion.com/) a VW Camper camping event,
>> Almonte, ON, June 11 ~ 14, 2009
>>
>
>
>
> --
> Mark
> 1990 Westy (2.1 - manual)
|