Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (August 2009, week 1)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Mon, 3 Aug 2009 13:37:21 -0700
Reply-To:     Scott Daniel - Turbovans <scottdaniel@TURBOVANS.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Scott Daniel - Turbovans <scottdaniel@TURBOVANS.COM>
Subject:      Re: Longer studs for S A alloys?
Comments: To: Mark Tuovinen <mst@AK.NET>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
              reply-type=original

The vans only came with one length of rear stud. the way VW was able to use a thicker alloy wheel on the 'short for steel wheels' was clever..... their cone shaped lug nuts reach down further into the wheel, and grabs a few more threads that way, thus they get away with 'thick wheel on short studs' that way.

I don't know if SA 15 alloys need cone face or ball face nuts, but you need the right type for sure. No mixing those up. It's normal to need longer rear studs for thicker alloy wheels. Same for front I'd imagine. there's a guy on ebay I think that specializes in nothing but studs and nuts and wheel mounting bolts. shoot, thought I'd have a link for you ..., but guess not. he exists though. have fun ! Scott www.turbovans.com

----- Original Message ----- From: "Mark Tuovinen" <mst@AK.NET> To: <vanagon@GERRY.VANAGON.COM> Sent: Sunday, August 02, 2009 10:07 PM Subject: Longer studs for S A alloys?

>I am working on the installation of my 15" S A alloys on our `87 Westy >Syncro. Using tapered cone open end lug nuts when I mount the wheels to >the van the studs stop 3 to 4 threads short of the end of the lug nuts. Is >this normal or did vans that came with steel wheels have shorter studs than >those that came with alloy wheels? I have noticed a difference between the >amount of stud protruding from the lug nuts(using steel wheels) on our >Westy Syncro(shorter) vs the Sunroof Syncro(longer), both are `87's. The >Westy came to us with steel wheels while the other van had both alloys and >steels with it and I suspect that the alloys are original to the van. The >difference is not much but is noticeable. > > Any knowledgeable input is greatly appreciated as we are taking off next > weekend for 5 -7 days with the van and will be in places where services, > if any, are severely limited. I am assuming that longer studs are in > order and need to expedite a set plus installation if this is correct. > > TIA > > Mark in AK


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.