Date:         Tue, 4 Aug 2009 22:02:21 -0400
Reply-To:     Karl <tdiguru@WESTYVENTURES.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Karl <tdiguru@WESTYVENTURES.COM>
Subject:      1986 Westy - AC evaporator installation question
In-Reply-To:  <00a101ca156c$2ab00370$0201a8c0@korky2>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

OK, I pulled the interior from this van to have it repainted last fall
and just now have started reassembly. It's like a puzzle since I forgot
much of how it all fit together, but most pieces are falling into place.
But one I can't quite remember is where the evaporator temp sensor wire
goes--it's a gray double wire that terminates in a small red sensing
tip. Does the tip tuck into the evaporator fins, or does the wire clip
in place somewhere with the tip dangling, or what? Thanks for any advice.

Karl

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.