Date:         Wed, 5 Aug 2009 22:07:04 -0600
Reply-To:     Bob Stevens <mtbiker62@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Bob Stevens <mtbiker62@GMAIL.COM>
Subject:      Re: MODERATOR Trimming replies was Re: temp sensors?
Comments: To: Jake de Villiers <crescentbeachguitar@gmail.com>
In-Reply-To:  <71d9cdf90908051932l163e34abqd4451b507ed51a6c@mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1

There is a high probability this is going to sound condescending and it's
not intended that way but here goes.I bought a computer 10 years ago and
took some classes and did some reading about how to use it and it's
features.
I also read some of the booklets and instructions that came with the Dell
computer. Then I had to learn how to "behave"
while using the internet and that's where/when I found out about:
How to cut and paste:
1/ highlight the text you want to cut/copy/delete. Highlighting can be done
by putting the blinking cursor at the beginning
of the text to be highlighted, push and hold down the left mouse button, and
drag the cursor down to the bottom of the text
to be cut/copied/deleted. Release left mouse button. Right click the
highlighted text and left-click on the "cut" option. You
can also use the "Edit" in the toolbar at the top of the screen to "cut" or
delete what you have highlighted.

ONce you cut text, that text is stored or remembered and if you wanted to,
you could paste that text into another email or
word project.

I just did the above to what used to be below the text at the bottom of this
email, under the top part of Jake's email.

bob

On Wed, Aug 5, 2009 at 8:32 PM, Jake de Villiers <
crescentbeachguitar@gmail.com> wrote:

> Blahblah blah blah Jake.  Instructions is what we need David, not
> imprecations.
>
>
>