Hi all. My 182B was exposed to water/moisture by PO. It works, but thermostat "scratchy" and tube from thermostat to interior on 182B corroded at bend behind thermostat. Tube might last, but hope to nip this in the bud (swap in 182A thermostat + tube). My 182A thermostat looks relatively new. Will a 182A thermostat swap "plug and play" into a 182B Dometic? Tubes to "yellow" safety valve different so it would stay. But, distance between "yellow" valve and gas valve *seems* the same. But, not sure if "yellow" safety switch threads at thermostat are the same or if special tape or pipe dope required at these threads. Pics easy to provide. Thought I'd ask before taking apart! Much thanks and apologies if this has been asked and answered in archives. Neil. -- Neil Nicholson '81 VanaJetta 2.0 "Jaco" http://tubaneil.googlepages.com/ http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.