Richard, the HS2800 will in fact fit , it just takes a bit more trimming on the side of the seat box where the fitting needs to go, and a tight turn on the flex ducting to the heat outlet. I've done at least one that way. You can also run the ducting through the top of the rear heater cover and to an outlet on the other side. That's how I had mine installed years ago, leaving the existing heater in place. Karl
Richard Jones wrote: I have a new Propex 2800 for sale. I bought it ~5 years ago; the first group of 2800s that Karl brought in. But I have a Carver installed and so never got around to it until last spring. I determined that the VW underseat heater needs to be removed for the 2800 to fit; I didn't want to do that. (Westy talk) |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.