Having the vehicle turn the engine without power is often known as over running. The engine basically an air pump and even with the throttle closed some air will always get pulled through. When things are working properly, the Vanagon ECU will cut off the injectors when the throttle is closed and the engine is over run above ~1,350 rpm for the 1.9 and 1,450 for the 2.1. With no fuel and a lot of air, the engine will cool down. When the engine temps goes below ~120f the ECU will go back to open loop and the fuel cut off is no longer active. Also, when the engine returns to normal idle or the throttle is opened the O2 sensor is ignored for a short while. Folks with the 1.9 know this effect when they get that idle surge. The 2.1 addresses this with the raised cut off speed. One problem of operating the engine for a long period this way is that after some time oil will get sucked into the intake valves through the guides. Sometimes during this scenario you will get some unburned fuel and oil into the exhaust and you may get some small backfires. This is an unusual operating condition. Dennis |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.