Date:         Mon, 17 Aug 2009 10:10:58 -0500
Reply-To:     Max Wellhouse <dimwittedmoose@CFU.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Max Wellhouse <dimwittedmoose@CFU.NET>
Subject:      Re: Requesting assistance from someone with stock late-model rear
              shoulder belts
Comments: To: Robert Fisher <refisher@MCHSI.COM>
In-Reply-To:  <002c01ca1ece$94a97430$bdfc5c90$@com>
Content-Type: text/plain; charset="us-ascii"; format=flowed

If I'm reading this correcty, doesn't the Bentley manual have those
measurements diagramed in the book?

YMMV

DM&FS

At 07:06 PM 8/16/2009, Robert Fisher wrote:
>-'87 GL with factory air-
>
>I'm getting ready to install some rear shoulder belts, and I'm evidently
>going to have to cut or notch the 'D' pillar covers so that the belts will
>have room to do their thing. I've seen indirect pictures of this setup, but
>what I'm asking for are straight on pictures of the cut-outs and the cover
>in general, preferably with a tape measure alongside so I can get an idea of
>dimensions, shapes and so on; or to put it another way, whatever information
>visual or otherwise that the person providing would believe to be useful to
>someone undertaking this mod.
>
>I have a suspicion that the covers themselves are of a somewhat different
>shape, but I'll just have to deal with that best I can.
>
>
>
>Thanks in advance,
>
>Robert