Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (August 2009, week 4)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Tue, 25 Aug 2009 16:22:56 -0700
Reply-To:     Rocket J Squirrel <camping.elliott@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Rocket J Squirrel <camping.elliott@GMAIL.COM>
Subject:      Re: Aux. Wire/Battery Install Pics/Notes
Comments: To: mark drillock <mdrillock@COX.NET>
In-Reply-To:  <4A9445B6.5020306@cox.net>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

Couldn't ya put a paint-cutting washer between the relay case and the chassis? An outside-star lock washer will dig its little pointy teethy things right into the metals. Properly-torqued, it will be a gas-tight connection.

Like this guy:

http://product-image.tradeindia.com/00119865/s/0/Star-Washer.jpg

-- Mike "Rocket J Squirrel" Elliott 84 Westfalia: Mellow Yellow ("The Electrical Banana") 74 Utility Trailer. Ladybug Trailer, Inc., San Juan Capistrano Bend, OR KG6RCR

On 8/25/2009 1:12 PM mark drillock wrote:

> Not bad, seen much worse. The hot tip is to drill out the rivets that > hold that POS Westy sealed lid bracket to the otherwise normal battery > box so you can get batteries in/out without deforming the box and so > there is more room for the cables. Throw the POS away and then get a > regular lid with hinge that will attach to the existing small holes in > the edge. > > One other thing, that 3 wire type of relay is using it's metal case for > the coil ground so it may not work reliably unless you put a wire with > ring terminal under one of it's bolts and ground the other end up where > you can see it, like at the main battery ground. > > Mark > > neil N wrote: >> Hi all. >> >> Click on the slide show to view scintillating comments. <grin> >> >> http://picasaweb.google.com/musomuso/AuxBatteryWireInstall# >> >> I still need to install a proper fuse panel, (though the inline fuses >> will be fine), but I'm looking forward to trying all this stuff out. >> >> Neil. >> >> >> -- >> Neil Nicholson '81 VanaJetta 2.0 "Jaco" >> >> http://tubaneil.googlepages.com/ >> >> http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines >> >> >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.