Date:         Mon, 31 Aug 2009 13:33:00 -0700
Reply-To:     Scott Daniel - Turbovans <scottdaniel@TURBOVANS.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Scott Daniel - Turbovans <scottdaniel@TURBOVANS.COM>
Subject:      Re: collapsiable push rod tubes
Comments: To: Bob Stevens <mtbiker62@GMAIL.COM>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
              reply-type=original

Does the original poster need just one or what ?
I somehow ended up with a whole set of 8 of those ......
they tended to leak a little where the two parts slide in the middle - not
much, but also not up to the standard one would like with, say, fresh
cylinder heads.
I took 'em back off.  I think I have at least 4 good used ones.
I thought they were sure pricey ........especially if wanting a set of 8,
 but for emergency use ....
or replacing just one, to save removing a head, I think they're fine for
that.

if anyone wants to buy a used one or several, let me know. I haven't seen
them for a while, but I should have 3 or 4 around somewhere.
Scott
www.turbovans.com

----- Original Message -----
From: "Bob Stevens" <mtbiker62@GMAIL.COM>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Monday, August 31, 2009 1:12 PM
Subject: Re: collapsiable push rod tubes


> http://www.autohausaz.com/search/product.aspx?sid=jqxcux55c0445q45zgskj155&partnumber=025%20109%20337
> Bob
>
> On Mon, Aug 31, 2009 at 1:36 PM, Mark Dearing <VWBrain@aol.com> wrote:
>
>> hello guys   anybody know where these can be found  part #  025 109 337
>> thanks  mark d
>>